CVE-2024-53980

eventually results into an endless loop on a CC2538 as receiver. Before PR #20998, the receiver would check for the location of the CRC bit using the packet length byte by considering all 8 bits, instead of discarding bit 7, which is what the radio does. This then results into reading outside of the RX FIFO. Although it prints an error when attempting to read outside of the RX FIFO, it will continue doing this. This may lead to a discrepancy in the CRC check according to the firmware and the radio. If the CPU judges the CRC as correct and the radio is set to `AUTO_ACK`, when the packet requests and acknowledgment the CPU will go into the state `CC2538_STATE_TX_ACK`. However, if the radio judged the CRC as incorrect, it will not send an acknowledgment, and thus the `TXACKDONE` event will not fire. It will then never return to the state `CC2538_STATE_READY` since the baseband processing is still disabled. Then the CPU will be in an endless loop. Since setting to idle is not forced, it won't do it if the radio's state is not `CC2538_STATE_READY`. A fix has not yet been made.