Security Resilience

CVE-2025-22022

Memory Safety in Linux Kernel ≤ 6.12.22

Published
16 April 2025
Modified
30 July 2026
Patch / advisory
CVSS Score v3.1 7.8
Click a component to see what it means
Raw vectorCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
EPSS Score 0.0020 10th percentile
Risk Priority 55 floored blend · peak EPSS

CVSS and EPSS are reproduced from their sources (NVD, FIRST EPSS). EPSS scores by FIRST (EPSS SIG), generated by Empirical Security. Risk Priority is our own derived reading, not an NVD score.

Summary

CVE-2025-22022 is a high-severity Out-of-bounds Write (CWE-787) vulnerability in Linux Kernel. Its CVSS base score is 7.8 (High).

Operationally, exploitation aligns with the MITRE ATT&CK technique Exploitation of Remote Services (T1210); ranked at the 10th percentile by exploit likelihood (below the median); it is not currently listed in the CISA KEV catalog.

The strongest mitigations our analysis identified map to SA-11 (Developer Testing and Evaluation) and SA-15 (Development Process, Standards, and Tools) — see the control section below for these in your framework.

EU & UK References

Vulnerability Data

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Apply the link chain quirk on NEC isoc endpoints Two clearly different specimens of NEC uPD720200 (one with start/stop bug, one without) were seen to cause IOMMU faults…

more

after some Missed Service Errors. Faulting address is immediately after a transfer ring segment and patched dynamic debug messages revealed that the MSE was received when waiting for a TD near the end of that segment: [ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0 [ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000] [ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000] It gets even funnier if the next page is a ring segment accessible to the HC. Below, it reports MSE in segment at ff1e8000, plows through a zero-filled page at ff1e9000 and starts reporting events for TRBs in page at ff1ea000 every microframe, instead of jumping to seg ff1e6000. [ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag. [ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 At some point completion events change from Isoch Buffer Overrun to Short Packet and the HC finally finds cycle bit mismatch in ff1ec000. [ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2 It's possible that data from the isochronous device were written to random buffers of pending TDs on other endpoints (either IN or OUT), other devices or even other HCs in the same IOMMU domain. Lastly, an error from a different USB device on another HC. Was it caused by the above? I don't know, but it may have been. The disk was working without any other issues and generated PCIe traffic to starve the NEC of upstream BW and trigger those MSEs. The two HCs shared one x1 slot by means of a commercial "PCIe splitter" board. [ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd [ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s [ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00 [ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0 Fortunately, it appears that this ridiculous bug is avoided by setting the chain bit of Link TRBs on isochronous rings. Other ancient HCs are known which also expect the bit to be set and they ignore Link TRBs if it's not. Reportedly, 0.95 spec guaranteed that the bit is set. The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports tens of MSEs per second and runs into the bug within seconds. Chaining Link TRBs allows the same workload to run for many minutes, many times. No ne ---truncated---

CWE(s)

Related Threats

MITRE ATT&CK Enterprise Techniques

T1210 Exploitation of Remote Services Lateral Movement
Adversaries may exploit remote services to gain unauthorized access to internal systems once inside of a network.
T1212 Exploitation for Credential Access Credential Access
Adversaries may exploit software vulnerabilities in an attempt to collect credentials.
T1584.008 Network Devices Resource Development
Adversaries may compromise third-party network devices that can be used during targeting.
T1068 Exploitation for Privilege Escalation Privilege Escalation
Adversaries may exploit software vulnerabilities in an attempt to elevate privileges.
T1203 Exploitation for Client Execution Execution
Adversaries may exploit software vulnerabilities in client applications to execute code.
T1190 Exploit Public-Facing Application Initial Access
Adversaries may attempt to exploit a weakness in an Internet-facing host or system to initially access a network.
Derived from this CVE’s CWE(s) via the direct CWE→ATT&CK cross-walk.

CVEs Like This One

CVE-2024-53193Same product: Linux Linux Kernel
CVE-2025-21869Same product: Linux Linux Kernel
CVE-2023-52495Same product: Linux Linux Kernel
CVE-2024-26730Same product: Linux Linux Kernel
CVE-2023-52790Same product: Linux Linux Kernel
CVE-2024-50203Same product: Linux Linux Kernel
CVE-2023-52916Same product: Linux Linux Kernel
CVE-2024-38621Same product: Linux Linux Kernel
CVE-2023-31436Same product: Linux Linux Kernel
CVE-2023-53142Same product: Linux Linux Kernel

Affected Assets

linux
linux kernel
6.14 · ≤ 6.12.22 · 6.13 — 6.13.10

Mitigating Controls

Mitigating Controls (NIST 800-53 r5) AI

Developer testing and evaluation (including fuzzing and bounds checks) finds out-of-bounds write flaws before deployment.

Requiring documented secure-development standards and tools can mandate bounds-checked coding practices that avoid the weakness.

Input validation can structurally reject or sanitize data that would otherwise trigger an out-of-bounds write.

Memory-protection mechanisms limit the exploitability and blast radius of a successful out-of-bounds write.

Mitigating Controls (NIST CSF 2.0) AI

Derived directly from the weakness types (CWEs) cited in the NVD entry via our AI-authored CWE→CSF cross-walk (authority under review) — links open the control.

PR.PS-06 mostly match
blocks

Secure-development practices (static analysis, bounds checking, code review) are the primary means of preventing out-of-bounds writes.

ID.RA-01 partial match
blocks

Vulnerability scanning and recording can discover out-of-bounds write flaws so they can be remediated.

PR.PS-02 partial match
blocks

Patching or replacing vulnerable software directly eliminates known instances of this coding weakness.

Mitigating Controls (ISO/IEC 27001:2022 Annex A) AI

Derived directly from the weakness types (CWEs) cited in the NVD entry via our AI-authored CWE→ISO cross-walk (authority under review) — links open the control.

finds

Security testing in development and acceptance can detect and prevent out-of-bounds write defects.

prevents

Secure coding directly addresses out-of-bounds writes through language choice and coding standards.

References