Raw vector
CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:HSummary
CVE-2020-1631 is a high-severity Path Traversal (CWE-22) vulnerability in Juniper Junos. Its CVSS base score is 8.8 (High).
Operationally, exploitation aligns with the MITRE ATT&CK technique Data from Local System (T1005); ranked in the top 9% of CVEs by exploit likelihood; CISA has added it to the Known Exploited Vulnerabilities catalog.
Deeper analysis AI-assisted summary
Synthesised by an AI model from the NVD description and linked references — a reading aid, not an authoritative source.
A vulnerability in the HTTP/HTTPS service of Juniper Networks Junos OS enables unauthenticated local file inclusion or path traversal attacks. The flaw affects the service components used by J-Web, Web Authentication, Dynamic-VPN, Firewall Authentication Pass-Through with Web-Redirect, and Zero Touch Provisioning when HTTP/HTTPS services are enabled; devices with these services disabled are unaffected. Successful exploitation can allow command injection into httpd.log, reading of world-readable files including the configuration on releases 19.3R1 and later, or theft of J-Web session tokens.
An unauthenticated remote attacker can exploit the issue over the network to obtain J-Web session tokens. When J-Web is active and an administrator session exists, the attacker can impersonate that user and gain full administrative control of the device through the web interface, corresponding to the highest reported CVSS score of 8.8.
Juniper SIRT advisory JSA11021 lists fixed releases for each affected Junos OS branch and recommends disabling HTTP/HTTPS services when not required. The vendor notes that the /var/log/httpd.log file may contain detectable patterns such as "=*;*&" or "*%3b*&" from attempted exploitation, although a skilled attacker can erase these entries.
CISA has added CVE-2020-1631 to its Known Exploited Vulnerabilities catalog, and Juniper has received one report of in-the-wild exploitation.
OWASP Top 10 for Web (2025)
EU & UK References
- 🇪🇺 ENISA EUVD: EUVD-2020-12499
Vulnerability Data
A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Zero Touch Provisioning (ZTP) allows an unauthenticated attacker to perform local file inclusion (LFI) or path traversal. Using this vulnerability, an…
more
attacker may be able to inject commands into the httpd.log, read files with 'world' readable permission file or obtain J-Web session tokens. In the case of command injection, as the HTTP service runs as user 'nobody', the impact of this command injection is limited. (CVSS score 5.3, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N) In the case of reading files with 'world' readable permission, in Junos OS 19.3R1 and above, the unauthenticated attacker would be able to read the configuration file. (CVSS score 5.9, vector CVSS:3.1/ AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N) If J-Web is enabled, the attacker could gain the same level of access of anyone actively logged into J-Web. If an administrator is logged in, the attacker could gain administrator access to J-Web. (CVSS score 8.8, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H) This issue only affects Juniper Networks Junos OS devices with HTTP/HTTPS services enabled. Junos OS devices with HTTP/HTTPS services disabled are not affected. If HTTP/HTTPS services are enabled, the following command will show the httpd processes: user@device> show system processes | match http 5260 - S 0:00.13 /usr/sbin/httpd-gk -N 5797 - I 0:00.10 /usr/sbin/httpd --config /jail/var/etc/httpd.conf To summarize: If HTTP/HTTPS services are disabled, there is no impact from this vulnerability. If HTTP/HTTPS services are enabled and J-Web is not in use, this vulnerability has a CVSS score of 5.9 (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). If J-Web is enabled, this vulnerability has a CVSS score of 8.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H). Juniper SIRT has received a single report of this vulnerability being exploited in the wild. Out of an abundance of caution, we are notifying customers so they can take appropriate actions. Indicators of Compromise: The /var/log/httpd.log may have indicators that commands have injected or files being accessed. The device administrator can look for these indicators by searching for the string patterns "=*;*&" or "*%3b*&" in /var/log/httpd.log, using the following command: user@device> show log httpd.log | match "=*;*&|=*%3b*&" If this command returns any output, it might be an indication of malicious attempts or simply scanning activities. Rotated logs should also be reviewed, using the following command: user@device> show log httpd.log.0.gz | match "=*;*&|=*%3b*&" user@device> show log httpd.log.1.gz | match "=*;*&|=*%3b*&" Note that a skilled attacker would likely remove these entries from the local log file, thus effectively eliminating any reliable signature that the device had been attacked. This issue affects Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S16; 12.3X48 versions prior to 12.3X48-D101, 12.3X48-D105; 14.1X53 versions prior to 14.1X53-D54; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D211, 15.1X49-D220; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R3-S2 ; 18.4 version 18.4R2 and later versions; 19.1 versions prior to 19.1R1-S5, 19.1R3-S1; 19.1 version 19.1R2 and later versions; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2; 20.1 versions prior to 20.1R1-S1, 20.1R2.
- CWE(s)
- KEV Date Added
- 25 March 2022
Related Threats
MITRE ATT&CK Enterprise Techniques
CVEs Like This One
Affected Assets
Mitigating Controls
Control response
—
—
—
V5.3.2
Likely Mitigating Controls AI
Per-CVE control mapping for this CVE has not run yet; the list below is derived from the weakness types (CWEs) cited in the NVD entry.
Validates pathnames and filenames to prevent traversal outside intended directories.
Mitigating Controls (NIST CSF 2.0) AI
Derived directly from the weakness types (CWEs) cited in the NVD entry via our AI-authored CWE→CSF cross-walk (authority under review) — links open the control.
Secure SDLC practices include input validation and path sanitization that eliminate this weakness.
Least-privilege file authorization directly limits damage from externally controlled paths.
Patching/maintenance can remediate known path-traversal flaws in deployed software (partial prevention of exploitability) but does nothing to stop the coding defect from being introduced in the first place.
Mitigating Controls (ISO/IEC 27001:2022 Annex A) AI
Derived directly from the weakness types (CWEs) cited in the NVD entry via our AI-authored CWE→ISO cross-walk (authority under review) — links open the control.
Security testing in development catches path traversal via static/dynamic analysis.
Secure SDLC mandates input validation and path sanitization that directly prevent path traversal.
Application security requirements include rules for safe file handling and canonicalization.
Secure architecture principles require least-privilege file access and directory isolation.
Secure coding standards explicitly forbid unsafe path construction and mandate safe APIs.
Information access restriction limits which files an application may read or write.